Page 520 of 910 Configuration of IP Telephony nodes using OTM 2.2
553-3001-365 Standard 4.00 August 2005
11 Monitor the display on the test telephone. As it upgrades the firmware,
note the IP Address of the Voice Gateway Media Card from where the test
telephone is receiving its upgrade.
12 Press the Services key (key with globe with arrow pointing East and
West) on the IP Phone. The Services key provides access to the
Telephone Options list.
a. Press Select to select Telephone Options.
b. Use the Navigation keys to scroll to Set Info.
c. Press the Select softkey, then press the Navigation keys until it
displays FW Version:. For the Voice Gateway Media Card, select the
appropriate firmware.
Note: For example, a firmware version can be labeled 0602B38, which
means IP Phone firmware version 1.38.
• 02 represents the IP Phone 2004.
• B represents the Version number 1.
• 38 represents the Release number .38
13 Lift the handset and make a call to verify the IP Phone works.
14 When the IP Phone is working, verify the date and time on the node.
Ensure each Voice Gateway Media Card has the correct loadware and
firmware before using the umsUpgradeAll command to upgrade all the
IP Phones.
To verify the date and time on the node from OTM 2.2, select the node in
the top of the IP Telephony Gateway - IP Line 4.5 window.
15 Double-click on Leader 0 in the bottom of the window.
The Card Properties window opens.
Note: Cards receive their time from the Leader 0 card. If the time for
Leader 0 is correct, all cards on the node should be the same. If Leader 0
displays the incorrect time, reset the time. The time propagates to the
other cards.
16 Click the Maintenance tab. This displays the Node time. If the time is
incorrect, click on the Set Node Time button.
The Set Node Time window opens. Under Time and date, set the Time,
where the time is displayed in the HH:MM:SS AM/PM format. Click OK to
close the window.