IP Line administration using Element Manager Page 599 of 910
IP Line Description, Installation and Maintenance
The Node Maintenance and Reports window opens.
24 Expand the node containing the new card(s) that were added by clicking
the plus sign (+) to the left of the Node ID.
25 Click the Status button for each Voice Gateway Media Card that was
added.
The card status should display as “Enabled” or “Disabled”. If the status
message of “WEB3003: Destination IP address cannot be reached; initial
RPC failure” is displayed, then verify the network connection and the
proper configuration of the network equipment.
26 Verify that all the new Voice Gateway Media Cards in the node have a
signaling link to the Call Server.
27 In the Element Manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Maintenance and Reports.
The Node Maintenance and Reports window opens.
28 Expand the node containing the Voice Gateway Media Card by clicking
the plus sign (+) to the left of the Node ID.
29 Click the GEN CMD button associated with the Voice Gateway Media
Card.
30 In the Group drop-down list, select pbxLink.
31 From the Command drop-down list, select pbxLinkShow.
See Figure 195 on page 600.