Configuration of IP Telephony nodes using Element Manager Page 399 of 910
IP Line Description, Installation and Maintenance
After a few seconds, the Transfer Progress window opens and displays
each of the Voice Gateway Media Cards in the node. See Figure 99 on
page 400.
The Voice Gateway Media Cards retrieve the CONFIG.INI and
BOOTP.TAB files from the Call Server. A check mark is added to each
field as the card receives its CONFIG.INI and BOOTP.TAB files.
4When the transfer is complete, click OK in the Transfer Successful
dialog box. See Figure 100 on page 400.
• If the transfer is successful for a card, the Status column displays
“Complete” and a check mark is displayed.
• If the transfer is unsuccessful, the Status column displays “Fail”.
A failed transfer can be caused by several situations, including the
following:
— improper cabling. Check cable connections.
— improper card configuration. Ensure all information is configured
correctly.
— the Voice Gateway Media Card running an older version of the
software than the Signaling Server. Verify the software version
on the Voice Gateway Media Card and upgrade the software if
necessary. Refer to “Upgrade the Voice Gateway Media Card
software and IP Phone firmware” on page 415.