Page 182 of 910 Features
553-3001-365 Standard 4.00 August 2005
If no port number is entered, the first entry found with the specified IP address
on a Voice Gateway Media Card is returned. An example is shown in
Figure 41.
Figure 41
vgwShow with IP address command output
When the IP address is found in the list of VGW channels for a card other than
the card where the command was entered, the VGW channel information for
the first occurrence is returned, plus a count of the number of times the IP
address occurs in that card’s list. Multiple instances can occur when the
customer’s network is configured so that multiple IP Phones are behind a
NAT device sharing the NAT device’s public IP address.
If there is more than one match, the administrator can log into that specific
card and enter the vgwShow command without entering an IP address and
port number. That will print all the busy channels on the card. To quickly find
a particular IP Phone, use the IPDN or DNIP commands in LD 117 to obtain
the IP Phone’s media stream public IP address and port number; then enter
the public IP address and port number as parameters for the vgwShow
command.

Personal Directory, Callers List, and Redial List

The Personal Directory, Callers List, and Redial List features are supported
on CS 1000 systems running CS 1000 Release 4.5 software.