Installation and configuration summary Page 305 of 910
IP Line Description, Installation and Maintenance
5Configure IP Line data using Element Manager:
a. Manually add an IP Telephony node. See page 370.
b. Configure SNMP traps and community names access for security.
See page 375.
c. Configure DSP Profile data. See page 379.
d. Configure DiffServ CodePoint (DSCP) data, 802.1Q support, and
NAT support. See page 385.
e. Configure Call Server ELAN network interface (Active ELNK)
IP address, TLAN Voice port (RTP UDP port), and the routing tables
on the Voice Gateway Media Card. See page 387.
f. Configure file server access. See page 392.
g. Configure the loss plan. See page 394.
h. Configure Voice Gateway Media Care properties. See page 395.
6Submit and transfer the node information to the Call Server. See
page 398.
7Transmit Voice Gateway Media Card configuration data to the Voice
Gateway Media Cards:
a. Set Leader IP Address. See Procedure 36 on page 402.
b. Transmit node and card properties to the Leader. See Procedure 37
on page 405.
8Upgrade the card software and IP Phone firmware:
a. Verify card software version. See page 420.
b. Verify card firmware release. See page 423.
c. Download software and firmware files from the Nortel web site. See
page 424.
d. Upload the software and firmware files to the file server. See
page 425.
e. Upgrade the software on the Voice Gateway Media Card. See
page 427.
f. Reboot the card. See page 432.
g. Upgrade the firmware on the card. See page 437.