Configuration of IP Telephony nodes using Element Manager Page 373 of 910
IP Line Description, Installation and Maintenance
2Enter the new Node ID in the New Node text box.
The Node ID can be one to four digits in length. When defining the node
number, determine if the Enhanced Redundancy for IP Line Nodes
functionality is required (see “Enhanced Redundancy for IP Line nodes”
on page 251). If it is required, factor the requirement into the node number
assignment process.
Note: The Node ID field corresponds to the Node ID field in the IP Phone
configuration. Write down the node number, which is used during the IP
Phone configuration.
3Click to Add.
The Edit window opens. See Figure 85 on page 374.
CAUTION
The Voice Gateway Media Cards identify themselves
with a node using the node number or node ID. If there
are multiple IP Telephony nodes sharing the same TLAN
subnet, each node must have a unique ID. Each system
on the TLAN subnet must have a unique node ID
assigned to the Voice Gateway Media Cards on the
system.