Page 398 of 910 Configuration of IP Telephony nodes using Element Manager
553-3001-365 Standard 4.00 August 2005

Submit and transfer the node information

To submit node changes and transfer the changes to the Call Server, follow

the steps in Procedure 35.

Procedure 35
Submitting and transferring the node information
1Click Save and Transfer when all the node information is configured in
the Edit window.
Clicking Save and Transfer saves and transfers the data to the Call
Server.
Note: There is a Save and Transfer button at both the top and bottom
of the Edit window.
The Edit window closes, and the Node Configuration window opens
with the new node added.
Note 1: Save and Transfer can be clicked after each section is
configured in the Edit window. However, each time Save and Transfer is
clicked, the Edit window closes and the Node Configuration window is
displayed. To continue the node configuration, click the Edit button to
return to the Edit window.
Note 2: If Cancel is clicked, all information that has been configured is
discarded. The Edit window closes and the Node Configuration window
opens.
2Click the Transfer/Status button for the node.
The Transfer confirmation dialog box opens.
3Click OK to confirm the transfer. See Figure 98.
Figure 98
Transfer confirmation dialog box