Features Page 123 of 910
IP Line Description, Installation and Maintenance
LD 117
CS 1000 Release 4.5 introduces the following commands in LD 117:
• STIP FW <XX> <A> <BB> <FF> – list IP Phones with specified
firmware ID and, optionally, firmware version. If no parameters are
entered, output is a list of available model names.
• STIP MODL <MMMM> – list IP Phones of specified model name
• RST ZONE <ZoneNumber> <START/STOP> <HH:MM> – reset IP
Phones in specified zone
• RST FW <FWID> <START/STOP> <HH:MM> – reset IP Phones with
specified F/W ID
See Table 21 on page 124.