IP Line 4.5 administration Page 561 of 910
IP Line Description, Installation and Maintenance

Display the number of DSPs

The DSPNumShow command displays the number of DSPs on the Voice
Gateway Media Card.
At the IPL> prompt, type: DSPNumShow.

Display IP Telephony node properties

The IPInfoShow command displays information about an IP Telephony
node.
At the IPL> prompt, type: IPInfoShow
The following IP Telephony node information is displayed on the TTY:
• IP addresses for the ELAN and TLAN subnets
• default router for the ELAN and TLAN subnets
• subnet mask for the ELAN and TLAN subnets
• SNMP manager
• IP routing table
• IP configuration of the card (which is related to the IP configuration of
the node)