Nortel Networks 1000 The following Graceful TPS CLI commands are available at the IP Line shell.

Voice Gateway Media Card maintenance Page 737 of 910
IP Line Description, Installation and Maintenance
The following Graceful TPS CLI commands are available at the IP Line shell.
Table 98
Graceful TPS commands (Part 1 of 2)
Command Description
disiTPS Disables the LTPS service only.
No new IP Phones are registered on the card and all registered IP
Phones are reset when they become idle.
This command applies to both the Voice Gateway Media Card and
Signaling Server. On the Signaling Server, this command affects
only the LTPS. It does not affect the virtual trunks or gatekeeper
components, which means the node mastership is not moved to
another LTPS.
disiVGW Disables the Voice Gateway only.
All Voice Gateways unregister with the Call Server when they
become idle. This command is applicable only to the Voice Gateway
Media Card or the stand-alone IP Line application.
disiAll Disables both the LTPS service and the Voice Gateway channels.
This command is a combination of both disiTPS and disiVGW
commands.
On the Signaling Server, this command affects only the LTPS. It
does not affect the virtual trunks or gatekeeper components, which
means the node mastership is not moved to another LTPS.
enaTPS Enables the LTPS service.
This command is used after the disTPS command to bring the LTPS
back into service.
This command applies to both Voice Gateway Media Cards and the
Signaling Server. On the Signaling Server, this command affects the
LTPS only. It does not affect the virtual trunks or gatekeeper
components.