Installation and initial configuration of an IP Telephony node Page 317 of 910
IP Line Description, Installation and Maintenance

Installing and cabling the Media Card

8-port and 32-port line cards

The Media Card 32-port line card is the successor of the ITG-P 24-port line
card. It increases the packet processing power of the ITG-P 24-port line card,
increases the channel density from 24 to 32 ports, and reduces the slot usage
from a dual slot to a single IPE slot.
Both the Media Card 32-port and 8-port line card require only one slot in the
IPE shelf.
CompactFlash installation
The Media Card package contains the following items:
•Media Card
• CompactFlash card
• retaining pin
The CompactFlash card must be installed on the Media Card before installing
the Media Card in the system. Follow the steps in Procedure 15 on page 318
to install the CompactFlash card.
Note: If it is necessary to remove the CompactFlash card, follow the
steps outlined in Procedure 107 on page 769.
CAUTION WITH ESDS DEVICES
Wear an ElectroStatic Discharge strap when handling
Media Card line cards. As an additional safety measure,
handle all cards by the edges, and when possible, with
the loosened packaging material still around the
component