Voice Gateway Media Card maintenance using OTM 2.2 Page 805 of 910
IP Line Description, Installation and Maintenance
19 In the OTM IP Telephony window, select View > Refresh and verify that
the replacement Voice Gateway Media Card state is showing
“Unequipped.”
End of Procedure

Verify the Voice Gateway Media Card loadware and firmware

To verify the loadware on the Voice Gateway Media Card and the firmware

on the IP Phone, follow the steps in Procedure 114.

Procedure 114
Verifying the Voice Gateway Media Card software and firmware
Note: Refer also to Procedure 64, “Verifying card loadware and IP
Phone firmware using OTM 2.2” on page 507.
1Check the Nortel Customer Support web site for the latest IP Line
software and IP Phone firmware releases. Download the appropriate IP
Line 4.5 file. See Appendix F on page 903.
• Download the IP Line 4.5xx.sa.zip for the Media Card. This zipped
file contains the IP Line 4.5 loadware for the Media Card, the IP
Phone firmware, and a readme.txt file.
• Download the IP Line 4.5xx.p2.zip for the ITG-P card. This zipped
file contains the IP Line 4.5 loadware for the ITG-P card, the IP
Phone firmware, and a readme.txt file.

CAUTION

This procedure is not supported for a node that resides
on a CS 1000 system.