Voice Gateway Media Card maintenance Page 767 of 910
IP Line Description, Installation and Maintenance
Choose the correct firmware version file for the Media Card platform..
If the upgrade process is successful, the following is displayed:
Upgrade packet:
0..100..200..300..400..500..600..700..800..900..100
0..1100..1200..
1300..1400..1500..1600..1700..1800..1900..
tUpgradeXa: 8051XA Upgrade completed OK
tUpgradeXa: Reboot the pack to run new loadware
Note: If the upgrade is not successful, these messages do not display.
Repeat step 5 again.
7Reboot the card.
Table 108
Upgrade command based on file location
— File is located on the card's /C: drive (The file was previously FTPed to /C:):
upgradeXa “127.0.0.1","userid","password","</C:/path>","<fw_filename>"
— File is located on a PC Card plugged in the card’s faceplate:
upgradeXa "127.0.0.1","userid","password","</A:/path>","<fw_filename>"
— File is located on another card’s /C: drive (The file was previously FTPed to /C:):
upgradeXa "<ITG ELAN IPaddr>","userid","password","<path>","<fw_filename>"
— File is located on the OTM PC:
upgradeXa "<PC’s IP addr>","itguser","itguser","","<Fw_filename>"
— File is located on a network FTP server:
upgradeXa "<server’s IP addr>","<uid>","<pswd>","<path>","<Fw_filename>"