Nortel Networks 1000 Access CLI commands from Element Manager

Voice Gateway Media Card maintenance using Element Manager Page 781 of 910
IP Line Description, Installation and Maintenance
Restarting the card causes the follower card to obtain its BOOTP
parameters from the Leader, and also establishes ELAN and TLAN
subnet connectivity.
11 Follow the steps in Procedure 38 on page 411 to load the CONFIG.INI file
onto the card.
12 Follow the steps in Procedure 43 on page 427 to download the latest
software to the Voice Gateway Media Card.
13 Follow the steps in Procedure 44 on page 432 to reboot the card and run
the new software.
14 Follow the steps in Procedure 46 on page 438 to update the card’s
firmware.
End of Procedure
Access CLI commands from Element Manager
Table 109 lists the informational CLI commands (by group) available from
Element Manager for the Voice Gateway Media Cards.
Table 109
Informational CLI commands by group for Voice Gateway Media Card (Part 1 of 3)
Group Command
Dsp dspSWVersion Show
dSPNumShow
Election electShow
Iset isetShow
isetNATShow
isetFWShow
isetFWGet
Mam disServices
enlServices