Voice Gateway Media Card maintenance Page 701 of 910
IP Line Description, Installation and Maintenance
ECNT CARD L S
C <customer>
Counts and prints the number of IP Phones registered for the specified
card.
• If the <customer> parameter is specified, the count is specific to that
customer. A card must be specified to enter a customer; otherwise, the
count is across all customers.
• If no parameters are entered, the count is printed for all zones. A partial
TN can be entered for the card (L or L S) which then prints the count
per that parameter. A customer cannot be specified in this case.
Example:
ECNT CARD 81
<< Card 81 >>
Number of Registered Ethersets: 5
Number of Unregistered Ethersets: 27
ECNT ZONE
zoneNum
<customer>
Counts and prints the number of IP Phones registered for the specified
zone.
• If <customer> parameter is specified, the count is specific to that
customer. A zone must be specified to enter a customer; otherwise, the
count is across all customers.
• If no parameters are entered, the count is printed for all zones.
Example:
ECNT ZONE 0 0
<< Zone 0 Customer 0 >>
Number of Registered Ethersets: 4
Number of Unregistered Ethersets: 17
Table 84
LD 32 – Maintenance commands for the Voice Gateway Media Card (Part 2 of 4)
Command Description