IP Line administration using Element Manager Page 617 of 910
IP Line Description, Installation and Maintenance
After the command is entered, an idle IP Phone should be updated with
the Watchdog reset message. However, the LTPS sends a soft reset
message to the IP Phone, re-directing it to the Connect Server. The
disabled LTPS does not accept new registrations, so the IP Phones must
register with another LTPS in the node. Eventually, as all of the LTPS’s IP
Phones become idle, they are registered with other TPSs. The Voice
Gateway Media Card can then be removed with no impact to any users.
End of Procedure
Procedure 82
Restarting a Voice Gateway Media Card in Element Manager
1In the Element Manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Maintenance and Reports.
The Node Maintenance and Reports window opens.
2Expand the node containing the Voice Gateway Media Card by clicking
the plus sign (+) to the left of the Node ID.
3Click the Reset button associated with the Voice Gateway Media Card.
See Figure 204 on page 618.