Page 678 of 910 IP Line administration using OTM 2.2
553-3001-365 Standard 4.00 August 2005

Changes to the DSP Profile tab settings are applied immediately when the

card properties are transmitted.

Procedure 100
Disabling and re-enabling the Voice Gateway Media Card
1Log into LD 32 on the Call Server and use the DISI command to disable
the Voice Gateway Media Card.
2In the OTM Navigator window, click the Services folder. Double-click the
IP Telephony icon.
The IP Telephony window opens.
3Select the IP Telephony node from the list in the upper part of the main
window.
All Voice Gateway Media Cards in the node are displayed in the lower part
of the window.
4Select the node from the node list and press function key F5 or View >
Refresh > Selected to refresh the card status of all cards in the selected
node.
5In the IP Telephony window, click the Configuration menu option and
then select Synchronize > Transmit.
The Transmit Options window appears.
6Select the Transmit to selected cards radio button.
7Click the Start transmit button.
Verify that the transmit is successful under Transmit Control and then
click Close.
8Login to the Call Server and go to LD 32.
9Type the ENCL command to enable the Voice Gateway Media Card.
End of Procedure