IP Line administration using OTM 2.2 Page 679 of 910
IP Line Description, Installation and Maintenance

Retrieve command

The Retrieve command sends information from the Voice Gateway Media
Cards to the OTM IP Telephony node. The Retrieve command is used for the
following:
• downloading a node or card configuration by a remote OTM user
Note: This can also be performed by using the “Add Node” command
and selecting the “Retrieve the active configuration from an existing
node” option.
• copying node information from one node to another
• restoring accidentally-changed OTM information, and downloading
information to a fictitious “dummy” node that has been created for this
purpose, in order to view the configuration of the Voice Gateway Media
Card and the IP Telephony node.
Follow the steps in Procedure 101 to use the Retrieve command.
Procedure 101
Using the Retrieve command
1In the OTM Navigator window, click the Services folder. Double-click the
IP Telephony icon.
The IP Telephony window opens.
2Select the card(s) from which to retrieve information.
3Click Configuration > Synchronize > Retrieve.
The Retrieve Options window opens. See Figure 230 on page 680.
CAUTION
This procedure is not supported for a node that resides
on a CS 1000 system.