IP Line 4.5 administration Page 555 of 910
IP Line Description, Installation and Maintenance
Type nodePwdShow to see the following:
PwdEna – the password is now enabled (PwdEna=Yes).
Pwd – if no <“password”> parameter specified, the administrator
password is null. IP Phones cannot be installed when the password is
null. A null password causes the node ID and Password screen to be
skipped during restart.
5Type nodePwdSet <“password”> at the IPL> prompt, where the
password parameter is 6 to 14 digits in length.
The valid character are 0-9 * #. For this example, use “1234567” as the
password.
6Type nodePwdShow to see the following:
PwdEna – the administrator password is enabled (PwdEna=Yes).
Pwd – the administrator password, 1234567, is displayed.
Note: Always specify the <password> parameter when entering the
nodePwdSet command.
NodeID
======
123
PwdEna
=======
Ye s
Pwd
========
TmpPwd
========
Uses
=======
Timeout
===========
0d 0h 0m 0s
WARNING
The nodePwdSet command, with no parameter, by
default enables the administrator password and sets a
null (zero-length) password.
IP Phones cannot be installed if the administrator
password is enabled and set to null.
Always specify the password parameter to install IP
Phones.
NodeID
======
123
PwdEna
=======
Ye s
Pwd
========
1234567
TmpPwd
========
Uses
=======
Timeout
===========
0d 0h 0m 0s