Installation and initial configuration of an IP Telephony node Page 339 of 910
IP Line Description, Installation and Maintenance
Table 64
LD 117 bandwidth management zone configuration
Command Description
NEW ZONE xxx p1 p2 p3 p4 p5 Create a new zone, where:
xxx = zone number = (0) – 255.
p1 = Intrazone available bandwidth
= 0 – (10000) – 100000 (Kbps)
p2 = Intrazone preferred strategy
= (BQ – Best Quality) or BB – Best Bandwidth
p3 = Interzone available bandwidth
= 0 – (10000) – 100000 (Kbps)
p4 = Interzone preferred strategy
= BQ for Best Quality or BB for Best Bandwidth
p5 = Zone resource type
= (shared) or private
New ZONE xxx Create a new zone with default values for the parameters:
p1 = 10000 (Kbps)
p2 = BQ
p3 = 10000 (Kbps)
p4 = BQ
p5 = shared
CHG ZONE xxx p1 p2 p3 p4 p5 Change parameters of a zone. All parameters must be
re-entered, even those that are unchanged.
OUT ZONE xxx Remove a zone.
DIS ZONE xxx Disable a zone. When a zone is disabled, no new calls
are established inside, from, or toward this zone.
ENL ZONE xxx Enable a zone.
PRT ZONE xxx
PRT ZONE ALL
Print zone and bandwidth information, where xxx
specifies a zone. If no zone is specified, information for all
zones is printed. PRT ZONE ALL also prints information
for all zones.