Voice Gateway Media Card maintenance Page 763 of 910
IP Line Description, Installation and Maintenance

Upgrade Voice Gateway Media Card firmware

The minimum versions of IP Line 4.5 firmware for the Voice Gateway Media
Card are:
• Version 6.8 for the NTVQ01AA and NTVQ01BA Media Card hardware
platform
• Version 8.2 for the NTVQ01AB and NTVQ01BB Media Card hardware
platform
• Version 5.7 for the ITG-P 24-port card
Note: Firmware versions 6.x and 8.x can only be used for the specified
Media Card hardware platforms. They cannot be used interchangeably.
Check the Nortel web site for the most current version of the firmware. See
Appendix F on page 903.
Once the most current version of the firmware has been downloaded, follow
the steps in:
• Procedure 105 on page 763 to upgrade the firmware on the ITG-P
24-port line card
• Procedure 106 on page 766 to upgrade the firmware on the Media Card

Upgrade the ITG-P 24-port card firmware

Follow the steps in Procedure 105 on page 763 to upgrade the firmware on
the ITG-P 24-port card. Enter all the upgrade commands at the VxWorks shell
prompt. Copy the F/W binary file (on a PC Card plugged into the card’s
faceplate) to the card’s /C: drive or to a network server accessible by the card.
Procedure 105
Upgrading the ITG-P 24-port card firmware
1Check if the firmware upgrade is required. Check the firmware version by
entering the firmwareVersionShow command:
IPL> firmwareVersionShow
Firmware Version = ITG Firmware Rls 4.5
value = 40 = 0x28 = '('
IPL>