Page 276 of 910 Personal Directory, Callers List, and Redial List
553-3001-365 Standard 4.00 August 2005

Fault clearance

The recovery of the database clears any faults.

Call Server configuration

To provide password protection for an IP Phone user’s Personal Directory,
Callers List, and Redial List, Station Control Password (SCPW) must be
configured on the Call Server. If SCPW is not configured, password
administration on the IP Phone cannot be accessed.
In LD 15 and in Element Manager, a new prompt, DFLT_SCPW, has been
added to the Flexible Feature Code (FFC) parameters for the Call Server.
When DFLT_SCPW is set to YES, the system assigns a default password (the
primary DN) to IP Phone users when an IP Phone is added or changed in
LD 11.
The new prompt DFLT_SCPW and the existing prompt Station Control
Password Length (SCPL) are prompted only if FFC package 139 is enabled.
The SCPL is also defined in LD 15’s Flexible Feature Code (FFC)
configuration parameters and in Element Manager. If the SCPL length is
changed, the change takes effect only after a data dump and then a sysload of
the Call Server. The SCPL is changed to the new length during the sysload.
If the length has been increased, then “0” is inserted at the beginning of the
Recommendation
Nortel recommends that the IP Phone Application Server be installed on
a dedicated Signaling Server to ensure that database operations do not
affect call processing.
IMPORTANT!
System administrators must ensure that users change the default
password on the IP Phone to control access, as the default password is
the same on all IP Phones when DFLT_SCPW is set to YES.