Mitsubishi Electronics QD75P, QD75D user manual Setting method, Setting item Setting details

12CONTROL SUB FUNCTIONS

[3]Setting method

MELSEC-Q

To use the "stop command processing for deceleration stop function", set the following control data in a sequence program.

The set data are made valid as soon as they are written to the buffer memory. The PLC ready signal [Y0] is irrelevant.

	Setting item		Setting	Setting details	Buffer memory address
			value
		Stop command		Set the stop command processing for
				deceleration stop function.
Cd.42		processing for			1907
				0: Deceleration curve re-processing
		deceleration stop
		selection		1: Deceleration curve continuation

For details of the setting details, refer to "Section 5.7 Control data list".

12 - 98