Mitsubishi Electronics QD75D, QD75P user manual Setting value K, Setting Value

5 DATA USED FOR POSITIONING CONTROL

MELSEC-Q

		Storage buffer
Setting value	Default value	memory address
		(common to axes 1
		to 4)

Set with a decimal.

Setting value K 1

Flash ROM write request 0 1900

1: Requests write access to flash ROM.

The QD75 resets the value to "0" automatically when the write access completes. (This indicates the completion of write operation.)

Set with a decimal.

Setting value K 1

Parameter initialization request	0	1901
1: Requests parameter initialization.

The QD75 resets the value to "0" automatically when the initialization completes. (This indicates the completion of parameter initialization.)

Set with a decimal.

Setting	K
value		0	1905

Deceleration start flag valid

0:Deceleration start flag invalid

1:Deceleration start flag valid

Set with a decimal.

Setting	K
value		0	1907

Stop command processing for deceleration stop selection

0:Deceleration curve re-processing

1:Deceleration curve continuation

5 - 111