Mitsubishi Electronics QD75D, QD75P 1517 1617 1717, 1518 1618 1718 1818, 1519 1619 1719 1819

5 DATA USED FOR POSITIONING CONTROL

MELSEC-Q

	Default	Storage buffer
Setting value		memory address
	value
		Axis 1 Axis 2 Axis 3 Axis 4

Set with a decimal.

Actual value Cd.16 Inching movement amount

Conversion into an integer value

Unit conversion table ( Cd.16 )

		10n		n	Unit
			-1		m
Setting value	R		-5		inch	0	1517 1617 1717 1817
(Decimal)					degree
			-5
			0		pulse

Example: When the " Cd. 16 Inching movement amount" is set as "1.0 m", the buffer memory stores "10".

Set with a decimal.

Actual value Cd.17 JOG speed
					Conversion into an integer value
							Unit conversion table ( Cd.17 )
						10n	n	Unit
Setting value							-2	mm/min	0	1518	1618	1718	1818
				R			-3	inch/min		1519	1619	1719	1819
	(Decimal)						-3	degree/min
							0	pulse/s
		Example: When the " Cd. 17 JOG
			speed" is set as "20000.00mm
			/min", the buffer memory
			stores "2000000".

Set with a decimal.

Setting	K	1
value
			Interruption request continuous operation
			1: Interrupts continuous operation control	0	1520 1620 1720 1820
			or continuous path control.
The QD75 resets the value to "0" automatically when the continuous
control interruption request is processed.
(This indicates the completion of continuous operation interruption request.)

5 - 121