Mitsubishi Electronics QD75D, QD75P 100 1513 1613 1713, 1514 1614 1714 1814, 1515 1615 1715 1815

5 DATA USED FOR POSITIONING CONTROL

MELSEC-Q

		Default	Storage buffer
	Setting value		memory address
		value
			Axis 1 Axis 2 Axis 3 Axis 4
Set with a decimal.
Setting value	K	100	1513 1613 1713 1813
		Override value (%)
		1 to 300
Set with a decimal.

Actual value Cd.14 New speed value

					Conversion into an integer value
							Unit conversion table ( Cd.14 )
						10n	n	Unit
Setting value							-2	mm/min	0	1514	1614	1714	1814
							-3	inch/min
				R						1515	1615	1715	1815
	(Decimal)						-3	degree/min
							0	pulse/s
		Example: When the " Cd. 14 New speed
			value" is set as "20000.00mm
			/min", the buffer memory
			stores "2000000".

Set with a decimal.

Setting value K 1

Speed change request	0	1516 1616 1716 1816
1: Executes speed change.

The QD75 resets the value to "0" automatically

when the speed change request has been processed. (This indicates the completion of speed change request.)

5 - 119