Mitsubishi Electronics QD75P, QD75D user manual Inch Degree Pulse, Setting range

When changing the speed, use this data item to specify a new speed.

Setting details

• To use the positioning operation speed override function, use this data item to specify an "override" value.

For details of the override function, refer to Section 12.5.2" Override function".

If the speed resulting from a small override value (e.g. 1%) includes fractions below the minimum unit, the speed is raised to make a complete unit and the warning No. 110 is output.

The operation halts if you specify "0".

•

•

• Set a value within the following range:

5 DATA USED FOR POSITIONING CONTROL

MELSEC-Q

Setting item

Cd.13

Positioning operation speed override

Cd.14

New speed value

		mm	inch	degree	pulse
	Pr.1	(⋅ 10-2mm/min)	(⋅ 10-3inch/min)	(⋅ 10-3degree/min)	(pulse/s)
Setting range		0 to	0 to	0 to	0 to 1000000
		2000000000	2000000000	2000000000

Cd.15

Speed change request

•After setting the " Cd.14 New speed value", set this data item to "1" to execute the speed change (through validating the new speed value).

5 - 118