2-53
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands dspclksrcs
source as unlockable and pro ceeds to use the next clock i n the hierarchy (of primary, second ary, internal
oscillator) as the current clock s ource. The exception to this final valid ation scenario occurs if the cu rrent
clock source is the internal os cillator in either the free running mode or the hold-over mode: in this case,
the software omits this fina lvalidation attempt because no other cl ocks sour ces withi n a cloc k hie ra rchy
are available.
Revertive Behavior
For information on reve rt ive behavior, see the cnfclks rc description.
Cards on Which This Command Runs
PXM45
Syntax
dspclksrcs
Related Commands
cnfclksrc, delclksrc, dspclkalms
Attributes
Example
Display the current clock sources. The display shows that both the prim ary and secondary clocks are
good. They are sourced at lines 2 and 3 of the AXSM in slot 6. Also, the active clock is provided by the
the primary source. The primary and secondary clock reason is “okay” in each case.
pinnacle.7.PXM.a> dspclksrcs
Primary clock type: generic
Primary clock source: 6.2
Primary clock status: good
Primary clock reason: okay
Secondary clock type: generic
Secondary clock source: 6.3
Secondary clock status: good
Secondary clock reason: okay
Active clock: primary
source switchover mode: non-revertive
Log: no log State: active, standby Privilege: ANYUSER