7-39
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter7 SPVC and SVC Commands dspcon
Syntax Description
Related Commands
addcon, dspcons, cnfcon
Attributes
Examples
Display connection 5 31 6 30 00 on the current AX S M .
MGX8850.1.AXSM.a > dspcon 5 31 63000
--------------------------------------------------------------------------
Local : NSAP Address port vpi vci
(M) 4700918100000000107BE92F3F00000101180500 1.01.05 31 63000
Remote : NSAP Address port vpi vci
(S) 4700918100000000107BE92F3F00000101180500 1.01.05 3201 100
--------------------------------------------------------------------------
Conn. Type : VCC Admn Status : ADMN-UP
Service Type : cbr1 Oper Status : FAIL
Controller : 2
--------------------------------------------------------------------------
Local PCR : 10000 Remote PCR : 1000
Local SCR : N/A Remote SCR : N/A
Local CDV : -1 Remote CDV : -1
Local CTD : -1 Remote CTD : -1
Local MBS : N/A Remote MBS : N/A
Local CDVT : -1 Remote CDVT : -1
Admin weight : -1 Frame discard: N
--------------------------------------------------------------------------
OAM CC Config :DISABLED Statistics : DISABLED
--------------------------------------------------------------------------
Loopback Type :No Lpbk | Dir:N/A | Status: No Lpbk | RTD: 0 us
ifNum (AXSM) Logical interface (port) number.
For AXSM, the range is 1–60.
portid (PXM45) The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 7-4.
vpi VPI number. At the UNI, the range is 0–255. At the NNI, the range is 0–4095.
vci VCI number. For a VCC, the range is 32–65535. For a VPC, the VCI is 0.
Log: no log State: active, standby Privilege: ANYUSER