Cisco Systems Cisco MGX 8850 manual dsppncon

6-79
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Com m ands dsppncon
dsppncon
Display Connection—display information about an active SVC or SPVC.
The information that dsppncon displays corresponds to the objects desc ribed in the portCallTable and
portAbrCallTable MIBs. This command can be issued at any node in the route. Refer to the example
for the contents of the comman d o ut pu t.
Cards on Which This Command Runs
PXM45
Syntax
dsppncon <portid> <vpi> <vci>
Syntax Description
Related Commands
dsppncons
Attributes
portid The portid is the PNNI ph ysi cal port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page 6-4.
vpi VPI for the call.
Default: 0
vci VCI for the call. If you do not specify a VCI, th e c onnection is a virtual path connection.
Default: 0
Log: nolog State: active, standby Privilege: ANYU SE R