Cisco Systems Cisco MGX 8850 tstpndelay

6-116
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Commands
tstpndelay
tstpndelay
Test Port Delay
Initiates loopback test for a connection. If you provide both a VPI and VCI, the segment endpoint is an
F5 flow endpoint (for VCCs). I f yo u pr o vide o nl y a VPI, th e se gm ent e nd point is a F4 fl o w endpo int (f or
VPCs). This command displays the round trip delay in microseconds.
Use cnfconsegep to specify the segment endpoint if one does not already exist.
Cards on Which This Command Runs
PXM45
Syntax
tstpndelay <portid> <vpi> [vci]
[-direction {inbound | outbound}]
Syntax Description
Related Commands
cnfconsegep
Attributes
portid The portid is the PNNI physical port. Th e f o rm at is
[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 6-4.
vpi VPI of the connec ti on .
vci VCI of the connection.
Default: 0
-direction Specifies the direction of loopback.
inbound: endpoint towards the backplane
outbound: endpoint departing the port
Default: inbound
Log: log State: active Privilege: SUPER_GP