5-71
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter5 PNNI Commands dsppnni-link-selection
dsppnni-link-selection
Display PNNI Link Selection—display the PNNI link setting, physical port identifier, and logical port identifier.
The dsppnni-link-selection command displays the link selection and both the physical and logical
identifiers for that link. R ef er t o t he description of cnfpnni-link-selection for information about the
criteria PNNI uses to choose between two parallel links.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-link-selection <portid>
Syntax Description
Display Contents
The display shows the following informat io n f o r each node.
Related Commands
dsppnni-link
Attributes
portid The PNNI physical port identifier. portid is entered and displayed as a 32-bit
string formatted as [shelf.]slot[:subslot].port[:subport]. For more details, see
PNNI Format.
physicalport id The portid is the PNNI physical port. The forma t i s
[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 5-5.
link selection The ASCII string displa yi n g t he link routing policy.
logicalportid The PNNI port identifier in t he for m o f a lo gi cal n umb er.
Range: 1–2147483648
Log: nolog State: active, standby Privilege: ANYUSER