9-24
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter9 Troubleshooting Commands
clrxbaralm
clrxbaralm
Clear Crossbar Alarmclear the crossbar alarms.
To see the alarms that clrxbaralm clears, execute dspxbaralarm or dspswalms. The clrxbaralm
command clears the alarms for eit he r a sp ec ific switch plane or for all the sw i tch p la ne s o n th e a ctive
switching card. In an MGX 8850 node, the switching slot is the slot number of the PXM45.
Cards on Which This Command Runs
PXM45
Syntax
clrxbaralm < * | [ slot plane ]>
Syntax Description
Related Commands
dspxbaralm, dspswalms
Attributes
Example
Clear the alarms for switch pl an e 0 in s l ot 7 . T he system returns no messages u n less an error exists in
the command syntax. To see the results, exec ut e dspxbaralm.
pop20two.7.PXM.a > clrxbaralm 7 0
*Enter an asterisk to clear all cr oss bar a la rms on the active PXM45.
slot The slot number of t he cr os s b a r p la nes. The slot number is 7 or 8.
plane The range for plane numbers is 02.
Log: log State: active Privilege: SUPER_GP