2-40
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands
commitrev
Note Of special note in Tabl e 2-8, runrev causes the standby c a rd to b eco me the active card and run the
new version of firmware. The rev ersed location of the Active a nd Standby columns shows these
changed states.
Cards on Which This Command Runs
PXM45
Syntax
commitrev <slot> <revision>
Syntax Description
Related Commands
loadrev, abortrev, runrev, setrev, dspversion
Attributes
Example
Commit the PXM45 in slot 8 to the grace ful upg ra de to f i le px m45_0 02. 0 00.00 0. 000_m gx .fw (s o 2.0( 0)
is the version). The system prompts you to confirm that you want the command to execute.
pinnacle.8.PXM.a > commitrev 8 2.0(0)
Table2-8 Redundant Pair Upgrade From 2.x to 2.y
Firmware
status Before upgrade After loadrev After runrev After commitrev
Active Standby Active Standby Standby Active Standby Active
Primary 2.x 2.x 2.x 2.x 2 .y 2.y 2.y 2.y
Secondary 2.x 2.x 2.y 2.y 2.x 2.x 2.y 2.y
Current 2.x 2.x 2.x 2.y 2.y 2.y 2.y 2.y
abortrev resets the
standby card. abortrev resets
both cards.
slot Number of the slot where firmware must revert to previous version.
revision Revision number derived from the name of the firmware file. For an explanation, see
the section, Version Numbering Conventions, in the loadrev description.
Log: log State: active Privilege: SERVICE_GP