Cisco Systems Cisco MGX 8850 AXSM Offline Diagnostics

9-33
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter9 Troubleshooting Commands cnfdiag
•NovRAM Checksum Test
5. Cell Path Test
•CBC Cell Path Test - Backplane Side
•Framer Cell Path Test - Port Side
•Humvee / Transceiver / Crossbar Switch Cell Path Test
AXSM Offline Diagnostics
1. I/O PLD data bus test
2. Skystone Framer regis te r & RAM test.
3. Humvee ASIC register test
4. CBC register test
5. ATMizer RAM test
6. QE48 register and RAM test
7. NovRAM checksum te st
8. Flash EPROM checksum test
Syntax
cnfdiag <slot> <onEnb> <offEnb>
[<offCover> <offStart> <offDow>]
Syntax Description
Cards on Which This Command Runs
PXM45
slot The slot of the card for which to configure the diagnostics.
onEnb Enable or disable online diagnostics. The default is disable.
offEnb Enable or disable offline diag no sti cs. The default is disable.
offCover Set the offline diagnostics coverage time to light, medium, or full.
•light = 5 minutes or less
•medium = 30 minutes or less
•full = 60 minutes or more
offStart Set the time for the offline diagnostics to begin using 24 hour time. The format is:
hh:mm. For example: 03:45 or 22:30.
offDow Sets the day of the week for the offline diagnostics to run.The format is SMTWTFS.
For example: -M-W--- is Mondays and Wednesdays only