9-92
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter9 Troubleshooting Commands
dspcons
AXSM Syntax
dspcons
[-conn <conn id>]
[-filt <filter options>]
[-if <intf no>]
[-vpi <vpi filter>]
[-vci <vci filter>]
AXSM Syntax Description
Related Commands
dspcon, addcon, cnfcon, delcon, dncon, upcon
PXM45 Attributes
AXSM Attributes
-conn The connection ID (conn ID) of the connection to begin the display. The
format of conn ID is:
ifNum.vpi.vci
The range for ifNum is 1–60 for the AXSM.
The VPI has the range 0–4095. The VCI has the range 32–65535.
-filt Unlike on the PXM45, you do not use keywords for this parameter on the
AXSM. You enter only a number on the AXSM CLI to indicate the stat e. The
display criteria are:
1 ingr—for errors in the ingress direction
2 egr—for errors in the egress direction
3 condn—for connections whe re the switch has condition ed th e c on n ect io n
4 iffail—for connection on a failed logical interface
5 ccfail
6 mis
7 abit—for connections where an A - bi t e rro r ha s o ccu rre d
-if A particular logical inter fa ce fo r co nn ec tion display.
-vpi The VPI of all the connections that you would like to display.
-vci The VCI of all the conn ections that you would like to display.
Log: no log State: active, standby Privilege: ANYUSER
Log: no log State: active, standby Privilege: GROUP1