Cisco Systems Cisco MGX 8850 manual delpnport

6-59
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Com m ands delpnport
delpnport
Delete Port
Remove a UNI or NNI port from the controller. It is allowed only if the PNNI port does not exist on the
switch i.e, the PNNI partition associ ated with the port is removed. If the controller does no provisioning
on the port in the Plug and Play Scenari o, the n the PNNI por t on the cont rol ler i s remo v e d if you re mo v e
the PNNI Partition on the sw it ch.
Cards on Which This Command Runs
PXM45
Syntax
delpnport <portid>
Syntax Description
Related Commands
addpnport, uppnport, dnpnport, dsppnport
Attributes
Example
Delete port 11:2.8:28 from the switch.
Geneva.7.PXM.a > delpnport 11:2.8:28
portid The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page 6-4 .
Log: log State: active Privilege: GROUP1