3-51
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning dspapslns
dspapslns
Display APS Lines
Displays all working a nd protection APS li ne s on a card. This com m a nd can be executed onl y o n an
active card. After identifying a particular APS line, you can use dspapsln to view detai ls about the line.
See the addapsln command for an explanation o f A ut om atic Protection Switching (APS ) .
Cards on Which This Command Runs
AXSM
Syntax
dspapslns
Syntax Description
This command takes no parameters.
Related Commands
addapsln, cnfapsln, delapsln, dspapsln, switchapsln, dspapsbkplane, clrbecnt, dspbecnt
Attributes
Example
Display all lines with an A PS co nfi gur ati o n on the current AXSM.
MGX8850.3.AXSM.a > dspapslns
Working Prot. Conf Oper Active SFBer SDBer WTR Revt Dir LastUser
Index Index Arch Arch Line 10^-n 10^-n (min) SwitchReq
------- ----- ---- ----- ------ ----- ----- ----- ---- --- ----------
3.1.1 3.1.2 1+1 1+1 working 3 5 5 No uni No Request
3.1.7 3.1.8 1+1 1+1 working 3 5 5 No uni No Request
Log: no log State: active, standby Privilege: ANYUSER