Cisco Systems Cisco MGX 8850 saveallcnf

2-88
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands
saveallcnf
saveallcnf
Save All Configurations—save all configuration files to the hard drive.
The saveallcnf command saves all configurations to a zi pped f i l e in t he CNF dir ec tory on t he ha rd d ri v e.
This command takes significant time, so a warning message prompts you for confirmation before the
system performs the task. Upon completion, the system displays the name of the saved configuration
file. The system stores up to tw o zi pp ed co n figuration files. If you want t o s ave more than two
configurations, use FTP to transfer the files to another device.
To restore the system configuration, use restoreallcnf.
Note You should execute saveallcnf only if no connection provisioning is occurring.
Cards on Which This Command Runs
PXM45
Syntax
saveallcnf
Related Commands
restoreallcnf
Attributes
Log: log State: active, init Privilege: SERVICE_GP