Cisco Systems Cisco MGX 8850 dsppnportsig

6-99
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Com m ands dsppnportsig
dsppnportsig
Display Port Signaling—displays signaling parameters on a port.
The dsppnportsig command display s th e ATM signaling parameter s as co nfigured by cnfpnportsig.
Cards on Which This Command Runs
PXM45
Syntax
dsppnportsig <portid>
Syntax Description
Related Commands
cnfpnportsig
Attributes
Examples
Display signaling f or p or t 3: 1.1:1 then port 2:2. 2: 1. Note the interface ty p e f o r 3: 1.1:1 is UNI, and the
UNI version is 3.1. On p or t 2:2.2:1, the interface ty pe is NNI, and the versi on i s I IS P 3 .1 .
8850_NY.8.PXM.a > dsppnportsig 3:1.1:1
provisioned IF-type: uni version: uni3.1
sigType: private side: network
addrPlan: aesa
VpiVciAllocator: n/a HopCounterGen: n/a
PassAlongCapab: n/a
sigVpi: 0 sigVci: 5
rccVpi: n/a rccVci: n/a
8850_NY.8.PXM.a > dsppnportsig 2:2.2:1
provisioned IF-type: nni version: iisp31
sigType: private side: network
addrPlan: aesa
VpiVciAllocator: n/a HopCounterGen: n/a
PassAlongCapab: enable
sigVpi: 0 sigVci: 5
rccVpi: n/a rccVci: n/a
8850_NY.8.PXM.a >
portid See PNNI Format, page 6-4. The portid r ep re sen ts t he PN N I ph ysi cal p or t an d ha s th e
format [shelf.]slot[:subslot].port[:subport].
Log: log State: active, standby Privilege: ANYUSER