Cisco Systems Cisco MGX 8850 setipconndebug

2-90
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands
setipconndebug
setipconndebug
Set IP Connection Debug
Specify a debug mode and whether to use a console for debugging IP connectivity. This command
requires SUPER_GP privilege. After you set the debug level, a status message states the current level.
Syntax
setipconndebug [-console | -noconsole] [debuglevel]
Syntax Description
Attributes
Example
Set IP connection d ebug t o console and speci fy a debug level of 20 for SVC call events.
node19.8.PXM.a > setipconndebug -console 20
-console | -no console Configure where to run setipconndebig: console (ASC II) te rminal or
elsewhere.
debuglevel Specifies a debug level. To select one or all of the following levels, e nter the
associated hexadecimal number a nd include the leading “0x” (see example):
•No Logging (0x0)
•Task Errors (0x1)
•Task Debug (0x2)
•ATM Protocol (0x4)
•Task S tart up ( 0x8 )
•Task Events (0x10)
•SVC Call Events (0x20)
•ATMARP Protocol (0x40)
•Task Timers (0x80)
•Interface Cache (0x100)
•Subtask Events (0x200)
•DISKDB Events (0x400)
•RAMDB Events (0x800)
•TRAP Events (0x1000)
•All Logging (0xffffffff)
Log: no log State: active, standby, init Privilege: SERVICE_GP