Cisco Systems Cisco MGX 8850 - page 410

5-116
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter5 PNNI Commands
dsppnni-summary-addr
Related Commands
addpnni-summary-addr, delpnni-summary-addr
Attributes
Example
Display the PNNI address prefixes. Th is c omm and line does not specify node-index, so the output
contains all PNNI summary addres se s in the peer group rather than a specifi c no d e. I n th is ca se, only a
single peer group exists.
Geneva.7.PXM.a > dsppnni-summary-addr
node index: 1
Type.............. internal Suppress.............. false
State............. advertising
Summary address........47.0091.8100.0000.0030.ff0f.ef38/104
node index: 1
Type.............. internal Suppress.............. false
State............. inactive
Summary address........47.0091.8100.0000.0010.7b65.f260/104
Geneva.7.PXM.a >
State This system-generated ASCII st rin g i ndi cat es the advertisement state.
Possible states: “advertising,” “notadvert ised,” or “inactive”
Summary address The ATM PNNI summary address assigned to the network. The default is a
combination of the peergroup ID appended with the switch MAC address.
prefixlength The length of the summary addre ss- pr e f ix in number of bits, equal or less than
152 bits. In the current release, the zero-length PNNI summary address is not
supported.
Log: nolog State: active, standby Privilege: ANYUSER