2-57
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands dspipif
dspipif
Display IP Interface Configuration
Display configuration and othe r information for either one or all IP interfaces on the current PXM45. If
you request all interfaces by entering dspipif with no parameters, the display shows information for all
interface types. The displayed i nf o rm ati on comes from the current st ate o f th e i nterface and the
configuration specified through ipifconfig. The information consists of the:
•Configuration (see ipifconfig for descriptions).
•Operational state.
•Statistics (including transmitted and received packets and errors).
Cards on Which This Command Runs
PXM45
Syntax
dspipif
[interface]
Syntax Description
Related Commands
ipifconfig, dspipifcache
Attributes
Example
Display information for all I P in t er fac es. T he output shows that no configur ati on ex is ts for the ATM
interface but do for Ethernet and SL IP. Note that f or e ach i nterface in the current release, t he “unit
number” has no meaning. The F lags field for Ethernet shows that the interf ace is UP, a broadcast address
has been configured, ARP is enab le d, an d that the interface is running. ( See the ipifconfig description
for the meaning of these paramete rs. The output also shows the number of packets that have crossed the
Ethernet interface. Although a co nfigu r ati o n ex ist s f or S L IP, the display shows that no packets have
crossed this interface.
interface (Optional) An alphanumeric string that identifies a type of interface for
display.Without this parameter, the system displays the configuration state of all
interface types. The choices f or interface are as follows:
•lnPci0 specifies the Ethernet int er face ( th e de fau lt o n power-up ).
•atm0 specifies the ATM interface.
•sl0 specifies the SLIP interface
Log: no log State: active, standby, init Privilege: ANYUSER