Cisco Systems Cisco MGX 8850 cnfoamsegep

7-30
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter7 SPVC and SVC Commands
cnfoamsegep
cnfoamsegep
Configure OAM Segment Endpoint
Define the port as a segment endpoint for F4 and F5 operations administration and maintenance (OAM)
cells. This command does not tak e effect ive f or exi s ti ng c onnections, and only does for newly
established calls. This comma nd c an be used regardless of the state o f th e po r t.
Command(s) on Which Comm and Executes
PXM45
Syntax
cnfoamsegep <portid>
[{yes | no}]
Syntax Description
Related Commands
dspoamsegep, cnfconsegep, delconsegep
Attributes
portid The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 7-4.
yes The port is configured as a segment endpoint and is a segment endpoint for all
connections on this port .
no The port is not a segment endpoint.
Default= no
Log: log State: active Privilege: GROUP1