Cisco Systems Cisco MGX 8850 dspipconntask

2-56
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands
dspipconntask
dspipconntask
Display IP Connectivity Task
Display the current state of the IP connectivity task. As a part of a troubleshooting regimen, the
dspipconntask command can help you isolate a problem related to IP connectivity.
Cards on Which This Command Runs
AXSM
Syntax
dspipconntask
Related Commands
ipifconfig, dspipif, dspipifcache, setipconndebug
Attributes
Example
Display the task information IP connection on the PXM45. Note that the Task Debug Level can be
modified through the setipconndebug command.
MGX8850.7.PXM.a > dspipconntask
IP CONNECTIVITY TASK INFORMATION
----------------------------------------------------------
Task State: ACTIVE
Card State: READY
Task Id: 0x10010
Subtask Id: 0x1005c
Disk API State: OK
SyncRam API State: OK
Task SyncRam State: UPDATE
Task Disk Update Bitmap:
Device Table: 0 0 0
Task SyncRam Update Bitmap:
Disk: 0 0 0
IO Links: 0 0 0
Interface Cache: 0 0 0
BootChange Sync: 0 0 0
Task Debug Level: 0x1
Task Logging To: Event Log
M8850_LA.7.PXM.a >
Log: no log State: active, standby, init Privilege: ANYUSER