Cisco Systems Cisco MGX 8850 manual dnln

9-49
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter9 Troubleshooting Commands dnln
dnln
Down Line
Use dnln to de-activate a line on the current card. Before you can de-activate a line, you m u st:
Step 1 Remove connections. Use delcon or delcons.
Step 2 Remove any resource pa rt it ions. Use dsprscprtn to see existing partitions and delrscprtn to re move
partitions.
Step 3 Remove all logical ports. Use dspports to see existing logical po r ts o n th e lin e and delport to remove
logical ports.
Cards on Which This Command Runs
AXSM
Syntax
dnln <bay.line>
Syntax Description
Related Commands
dspln, dsplns, cnfln, upln
Attributes
Example
De-activate line 1 in bay 1.
MGX8850.1.AXSM.a > dnln 1.1
bay.line Specifies a SONET line (OC-3c, OC-12c, OC-48c) or a DS3 line (E3or T3), the bay
(1 for upper or 2 for lower), and the line number. The line number ranges from 1 to
the highest number line on the back card.
Log: log State: active Privilege: GROUP1