Cisco Systems Cisco MGX 8850 - page 87

2-29
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands cnfndparms
Related Commands
dspndparms, dspndalms, dspenvalms
Attributes
Example
Change the time period for counting card resets to 30 minutes. First enter the command with no
parameters. The system displays the options and prompts you to enter an option number (rather than
display the help informat ion for this command). E nter a 2, then the system d isplays the current value fo r
this option.
MGX8850.7.PXM.a > cnfndparms
MGX8850 System Rev: 02.01 Sep. 04, 2001 12:15:13 PST
MGX8850 Node Alarm: CRITICAL
NODE CONFIGURATION OPTIONS
Opt# Value Type Description
---- ----- ---- -----------
1 3600 16bit Decimal SHM Card Reset Sliding Window (secs)
2 3 8bit Decimal SHM Max Card Resets Per Window (0 = infinite)
3 Yes Boolean Core Redundancy Enabled
4 No Boolean Expanded Memory on PXM45B Enabled
5 0x0 8bit Hex Required Power Supply Module Bitmap
6 0x0 8bit Hex Required Fan Tray Unit Bitmap
Enter option number (1-5): 1
NODE CONFIGURATION OPTIONS
Opt# Value Type Description
---- ----- ---- -----------
1 3600 16bit Decimal SHM Card Reset Sliding Window (secs)
Interval used to measure maximum number of card resets allowed.
Value must be greater than zero.
If nonzero, number of seconds used to measure card resets.
Enter 1800 at the prompt. The system subsequently displays the new setting.
Enter value for option 1: 1800
NODE CONFIGURATION OPTIONS
Opt# Value Type Description
---- ----- ---- -----------
1 1800 16bit Decimal SHM Card Reset Sliding Window (secs)
You can enter the option number and option value without prompting, and the system shows the result.
MGX8850.7.PXM.a > cnfndparms 1 1800
NODE CONFIGURATION OPTIONS
Opt# Value Type Description
---- ----- ---- -----------
1 1800 16bit Decimal SHM Card Reset Sliding Window (secs)
Log: no log State: active Privilege: SUPER_GP