Cisco Systems Cisco MGX 8850 dsppnni-intf

5-66
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter5 PNNI Commands
dsppnni-intf
dsppnni-intf
Display PNNI Interface—display the PNNI aggregation token and AW for a port.
This command displays the following information for a PNNI port:
•Aggregation token. The current release does not support the aggregation token.
•Administrative weight (AW).
•The logical port identifier assigned to the physical port identifier.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-intf <portid>
Syntax Description
Display Contents
The following parameters are disp layed for each node. The right column shows the label for each value
that appears in the dsppnni-intf command. The l ef t c ol um n m aps each value to the correspondin g
keyword in the cnfpnni-intf command and expl ai ns t h e arg u men t function.
portid The portid is the PNNI physical port. Th e f o rm at is
[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 5-5.
Default: none
Physical port Id Display the physical PNNI identifier on the interface. The portid variable is
entered and displayed as a nume ric string formatted as
[shelf.]slot[:subslot].port[:subport]. For more details including th e r a nges, see
PNNI Format.
Logical port Id Display the logical PNNI p o rt id en ti fier. The - portId parameter displays the
logical PNNI port identifier o n th e i nterface.
Range: 1–2147483648.
Aggr token Display the 32 bit nu mber used for link a gg regation purpose.
AW-NRTVBR Display the AW for non-real-time vari ab le bit rate (nrtvbr) connec ti on s o n th is
interface. nrtvbr accounts for th e burs ty t ra ffic that i s cau s ed by so m e
non-real-time application s. T his category is characterized i n terms of a PCR,
SCR, and MBS.
Range: 0–4194304