7-25
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter7 SPVC and SVC Commands cnfcon
Local-Only Parameters
The parameters CDVT, stats enable, cc enable ( sp eci fied u s in g -cd vt, -stat, -cc) are significant only at
the endpoint where you enter them . Therefore, they can be different at ea ch en d of t he co nnec tion.
AXSM Syntax
cnfcon
<ifNum>
<vpi>
<vci>
[-lpcr <local to remote PCR>]
[-rpcr <remote to local PCR>]
[-lscr <local to remote SCR>]
[-rscr <remote to local SCR>]
[-lmbs <local to remote MBS>]
[-rmbs <remote to local MBS>]
[-lcdv <local to remote maxCDV>]
[-rcdv <remote to local maxCDV>]
[-lctd <local to remote maxCTD>]
[-rctd <remote to local maxCTD>]
[-lmcr <local to remote MCR>]
[-rmcr <remote to local MCR>]
[-cdvt <local CDVT>]
[-cc <OAM CC Cnfg>]
[-stat <Stats Cnfg>]
[-frame <frame discard>]
[-mc <Max Cost>]
[-segep <OAM segment endpoint>]
AXSM Syntax Description
ifNum Logical port number. On the AXSM , th e r an g e i s 1 60.
vpi Virtual path identifier in the ra n ge 0 255 (UNI) or 04095 (NNI or VNNI).
vci Virtual connection identifier (VCI ) :
For a VCC on a UNI, the range is 14095. On an NNI or VNNI, the VCI range is
3265535. For M PL S, the recomme nded minimum V C I is 35.
For a VPC, the vc i is 0.
- lpcr Keyword that specifies the Peak Cell Rate (PCR) from a local endpoint to a remote
endpoint (75651328 cells per second). Peak Ce ll Rate is the maximum ce ll ra te fo r
the connection at any time.
- rpcr Keyword that specifies the Peak Cell Rate (PCR) from a remote endpoint to a lo ca l
endpoint (75651328 cells per second). Peak Ce ll Rate is the maximum ce ll ra te fo r
the connection at any time.
- lscr Keyword that specifies the Sustained Cell Rate (SCR) from a local endpoint to a
remote endpoint (75651328 cells per second). Sustained Cell Rate is the maximum
cell rate that a connection c an su s tai n fo r lo n g periods.