Cisco Systems Cisco MGX 8850 manual addfdr

3-11
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning addfdr
addfdr
Add Feeder
Adds a feeder node connection to t he sp eci fied p ort ( ifN um). The interface numbers of a ctive ports are
displayed in the dspports command report. LMI is up by default when you use addfdr.
When adding a feeder node, the following conditions apply:
•You can add a feeder node only to an already existing port (ifNum).
•You cannot add a feeder node to a port that already has a connection established on it.
•You cannot add a feeder node to a port with ILMI enabled.
•You cannot enable ILMI on a port that has a feeder node connection on it.
For more detailed information on configuring a feeder, see the Cisco MGX 8850 Switch Software
Configuration Guide, Release 2.
Syntax
addfdr <ifNum>
Syntax Description
Card(s) on Which This Comman d Executes
AXSM
Related Commands
delfdr, dspfdr, dspfdrs
Attributes
Example
MGX8850.1.AXSM.a > addfdr 1
ifNum The interface number of the port to which the feeder node connection will be added.
The interface numbers of active ports ar e displayed in the dspports command report.
Log: log State: active Privilege: GROUP1